A 3-D vector magnetization model with interaction field

This paper presents a vector model of magnetization based on the three-dimensional (3-D) Stoner-Wohlfarth elemental operator. To account for the magnetic interactions between particles, a phenomenological mean-field approximation is employed. The paper also illustrates the numerical simulation results of the magnetization in 3-D. This model will be useful to simulate the magnetization process of complicated topology flux electromagnetic devices. © 2005 IEEE

Measurement and modeling of core losses of soft magnetic composites under 3-D magnetic excitations in rotating motors

Soft magnetic composite (SMC) materials are especially suitable for construction of low-cost high-performance motors with three-dimensional (3-D) magnetic fields. The 3-D finite-element analysis (FEA) conducted in the design of a claw pole transverse flux motor (CPTFM) with an SMC core reveals very complicated B (flux density) loci in the core when the motor rotates. In order to understand and account for the effects of the patterns of B loci on motor parameters and performance such as core losses, a 3-D magnetic property testing system was built for magnetic measurement on a cubic SMC sample. 3-D rotational core loss models in SMC materials and rotating motors are developed. © 2005 IEEE

Improved measurement with 2-D rotating fluxes considering the effect of internal field

This paper analyzes the effect of the internal field on the measurement with two-dimensional (2-D) rotating fluxes. It is demonstrated that due to the effect of the internal field, the misalignment of H sensing coils, causing the asymmetry of H loci and the discrepancy of the rotational core losses between two opposite rotating directions cannot be corrected completely. A numerical averaging method is employed to eliminate the angular error. Finally, the B and H loci and rotational core losses of a soft magnetic composite (SMC) material were measured under circular rotating magnetic flux density vectors, and the results were corrected by the proposed averaging method. © 2005 IEEE

Green tea polyphenols ameliorate non-alcoholic fatty liver disease through upregulating AMPK activation in high fat fed Zucker fatty rats

© The Author(s) 2017. Published by Baishideng Publishing Group Inc. All rights reserved. To investigate protective effects and molecular mechanisms of green tea polyphenols (GTP) on nonalcoholic fatty liver disease (NAFLD) in Zucker fatty (ZF) rats. METHODS Male ZF rats were fed a high-fat diet (HFD) for 2 wk then treated with GTP (200 mg/kg) or saline (5 mL/kg) for 8 wk, with Zucker lean rat as their control. At the end of experiment, serum and liver tissue were collected for measurement of metabolic parameters, alanine aminotransferase (ALT) and aspartate aminotransferase (AST), inflammatory cytokines and hepatic triglyceride and liver histology. Immunoblotting was used to detect phosphorylation of AMP-activated protein kinase (AMPK) acetyl-CoA carboxylase (ACC), and sterol regulatory element-binding protein 1c (SREBP1c). RESULTS Genetically obese ZF rats on a HFD presented with metabolic features of hepatic pathological changes comparable to human with NAFLD. GTP intervention decreased weight gain (10.1%, P = 0.052) and significantly lowered visceral fat (31.0%, P < 0.01). Compared with ZF-controls, GTP treatment significantly reduced fasting serum insulin, glucose and lipids levels. Reduction in serum ALT and AST levels (both P < 0.01) were observed in GTP-treated ZF rats. GTP treatment also attenuated the elevated TNFα and IL-6 in the circulation. The increased hepatic TG accumulation and cytoplasmic lipid droplet were attenuated by GTP treatment, associated with significantly increased expression of AMPK-Thr172 (P < 0.05) and phosphorylated ACC and SREBP1c (both P < 0.05), indicating diminished hepatic lipogenesis and triglycerides out flux from liver in GTP treated rats. CONCLUSION The protective effects of GTP against HFD-induced NAFLD in genetically obese ZF rats are positively correlated to reduction in hepatic lipogenesis through upregulating the AMPK pathway

Magnetic properties of soft magnetic composites under three-dimensional excitations

Soft magnetic composite (SMC) materials are broadly used in low cost high performance electrical machines due to their magnetic isotropy, low eddy current loss, and capability to mould complex shapes. To optimise the performance of electrical machines, the three-dimensional (3-D) magnetic properties must be well understood and accurately modeled. For this purpose, a 3-D magnetic property measurement system was built and special sensing devices were fabricated. This paper presents, in detail, the magnetic flux density loci and the corresponding magnetic field strength loci for an SMC material when the flux density loci were controlled to be circles lying in the xoy-, yoz-, and zox-plane at 50 Hz. © 2007 - IOS Press and the authors. All rights reserved

Visualization of vortex motion in FeAs-based BaFe<inf>1.9</inf>Ni <inf>0.1</inf>As<inf>2</inf> single crystal by means of magneto-optical imaging

Superconductivity has been found in newly discovered iron-based compounds. This paper studies the motion of magnetic vortices in BaFe1.9Ni 0.1As2 single crystal by means of the magneto-optical imaging technique. A series of magneto-optical images reflecting magnetic flux distribution at the crystal surface were taken when the crystal was zero-field cooled to 10 K. The behavior of the vortices, including penetration into and expulsion from the single crystal with increasing and decreasing external fields, respectively, is discussed. The motion behavior is similar to that observed in high-Tc superconducting cuprates with strong vortex pinning; however, the flux-front is irregular due to randomly distributed defects in the crystal. © 2011 American Institute of Physics

Synthesis, structure, and magnetism in the ferromagnet La_{3}MnAs_{5}: Well-separated spin chains coupled via itinerant electrons

In this work, we systematically report the synthesis, structure, and magnetism of a compound of filled anti-Mn3Si5 type La3MnAs5. It crystallizes in a hexagonal structure with the space group of P63/mcm (193). The structure consists of face-sharing MnAs6 octahedral chains along the c axis, which are well separated by a large distance of 8.9913 Å, demonstrating a strong one-dimensional (1D) structural character. Physical property measurements indicate that La3MnAs5 is a ferromagnetic metal with TC ∼ 112 K. Due to the short-range intrachain spin coupling, the susceptibility deviates from the Curie-Weiss behavior in a wide temperature window and the magnetic entropy corresponding to the ferromagnetic transition is significantly lower than that expected from the fully saturated state. The magnetic critical behavior studies show that La3MnAs5 can be described by the three-dimensional Heisenberg model. The orbital hybridization between the 1D MnAs6 chain and intermediate La atom near the Fermi level reveals that the itinerant electrons play a key role in transmitting spin interaction among the MnAs6 spin chains. Our results indicate that La3MnAs5 is a rare ferromagnetic metal with well-separated spin chains, which provides a good opportunity to study the mechanism of interchain spin coupling via itinerant electrons

Mtss1 promotes cell-cell junction assembly and stability through the small GTPase Rac1

Cell-cell junctions are an integral part of epithelia and are often disrupted in cancer cells during epithelial-to-mesenchymal transition (EMT), which is a main driver of metastatic spread. We show here that Metastasis suppressor-1 (Mtss1; Missing in Metastasis, MIM), a member of the IMD-family of proteins, inhibits cell-cell junction disassembly in wound healing or HGF-induced scatter assays by enhancing cell-cell junction strength. Mtss1 not only makes cells more resistant to cell-cell junction disassembly, but also accelerates the kinetics of adherens junction assembly. Mtss1 drives enhanced junction formation specifically by elevating Rac-GTP. Lastly, we show that Mtss1 depletion reduces recruitment of F-actin at cell-cell junctions. We thus propose that Mtss1 promotes Rac1 activation and actin recruitment driving junction maintenance. We suggest that the observed loss of Mtss1 in cancers may compromise junction stability and thus promote EMT and metastasis

An extracellular steric seeding mechanism for Eph-ephrin signaling platform assembly

Erythropoetin-producing hepatoma (Eph) receptors are cell-surface protein tyrosine kinases mediating cell-cell communication. Upon activation, they form signaling clusters. We report crystal structures of the full ectodomain of human EphA2 (eEphA2) both alone and in complex with the receptor-binding domain of the ligand ephrinA5 (ephrinA5 RBD). Unliganded eEphA2 forms linear arrays of staggered parallel receptors involving two patches of residues conserved across A-class Ephs. eEphA2-ephrinA5 RBD forms a more elaborate assembly, whose interfaces include the same conserved regions on eEphA2, but rearranged to accommodate ephrinA5 RBD. Cell-surface expression of mutant EphA2s showed that these interfaces are critical for localization at cell-cell contacts and activation-dependent degradation. Our results suggest a 'nucleation' mechanism whereby a limited number of ligand-receptor interactions 'seed' an arrangement of receptors which can propagate into extended signaling arrays

Defects in Friction Stir Welding of Steel

Defects associated with friction stir welding of two steel grades including DH36 and EH46 were investigated. Different welding parameters including tool rotational and tool traverse (linear) speeds were applied to understand their effect on weld seam defects including microcracks and voids formation. SEM images and infinite focus microscopy were employed to identify the defects types. Two new defects associated with the friction stir welding process are introduced in this work. The first defect identified in this work is a microcrack found between the plunge and the steady state region and attributed to the traverse moving of the tool with unsuitable speed from the plunge-dwell to the steady state stage. The tool traverse speed has recommended to travel 20 mm more with accelerated velocity range of 0.1 from the maximum traverse speed until reaching the steady state. The maximum recommended traverse speed in the steady state was also suggested to be less than 400 mm/min in order to avoid the lack in material flow. The second type of defect observed in this work was microcracks inside the stirred zone caused by elemental precipitations of TiN. The precipitates of TiN were attributed to the high tool rotational speed which caused the peak temperature to exceed 1200 °C at the top of the stirred zone and based on previous work. The limit of tool rotational speed was recommended to be maintained in the range of 200-500 RPM based on the mechanical experiments on the FSW samples